Inverto Black Premium PLL Quad 40mm lnb

The Inverto IDLP-QDL410-PREMU-OPN Quad PLL LNB is suitable for the reception of the signal of one satellite position and the distribution of this signal to 4 DVB-S2 satellite tuners:

• in 4 TV's or
• 4 satellite receivers with each one DVB-S2 satellite tuner or
• to 2 satellite receivers with each a Twin / Dual DVB-S2 satellite tuner or
• to a combination of the above mentioned options.

The special design of the LNB make sure that interference of 4G/LTE-signals have no influence on the signal quality. Furthermore this IDLP-QDL410-PREMU-OPN series has a very low noise figure and power consumption.

Unlike conventional LNB's the IDLP-QDL410-PREMU-OPN is a Quad PLL (= phase-locked loop) LNB.

The IDLP-TWL410-PREMU-OPN LNB is HD and UHD compliant.

Main features Inverto IDLP-QDL410-PREMU-OPN 40mm Quad PLL LNB

• Low Phase Noise, DVB-S2 (HD and UHD) compliant
• Very low Noise Figure
• Low power consumption
• High Cross Polarization Isolation
• High Frequency stability

Technical parameters Inverto IDLP-QDL410-PREMU-OPN 40mm Quad PLL LNB

• Input Frequency Range: 10.7 GHz ~ 12.75 GHz
• Output Frequency Range: 950 MHz ~ 2150 MHz
• Low band LO frequency: 9.75 GHz
• High band LO frequency: 10.6 GHz
• Noise figure: 0.2 dB typ. (0.7 dB max.)
• LO frequency accuracy @ 25 °C: ±500 kHz max.
• LO temperature drift: ±1,0 MHz max.
• LO phase noise @ 10 kHz: -80 dBc/Hz max.
• Conversion gain: 55 dB min.
• Gain ripple (over 26 MHz bandwidth): ±0.6 dB
• Gain variation (over full band): ±3 dB
• Image rejection: 40 dB min.
• 3th order intermodulation - ICP3: 10 dBm min.
• 1 dB compression point (@ output): 0 dBm min.
• Cross polarization isolation: 22 dB min.
• Control signal Ca (V): 11,0 V ~ 14,0 V
• Control signal Cb (H): 16,0 V ~ 20,0 V
• Control signal Cc (band switching): 22 kHz (±4), 0.4 V ~ 0.8 V pp
• Output VSWR: 2.5:1
• In band spurious level: -60 dBm max.
• Current consumption: 120 mA max. @ 11 VDC ~ 20 VDC
• Operating temperature: -35 °C ~ +60 °C
• Output impedance: 75 Ω
• Output connector type: F-type (female)
• Dish F/D ratio: 0.6
• Weight: 221 g
• Packaging dimensions (W x D x H): 15.5 x 9.1 x 7.6 cm
• Packaging weight: 0.281 kg